㈜탑스전자 - 플루크,굿윌인스텍 대구/경북 공식 대리점 : 납품,설치,교육,서비스까지 All-in One
 
- 열화상 카메라
- 비주얼 적외선 온도계
- 전력계
- 전력분석기
- AC/DC용 클램프미터
- AC용 클램프미터
- 포켓 디지털 멀티미터
- 핸드헬드형 디지털 멀티미터
- 벤치형 디지털 멀티미터
- 배터리 테스터
- Proving Unit
- 일렉트로미터
- 내전압 시험기
- 절연저항 측정기
- 접지저항 측정기
- 다기능계측기
- 누설전류계
- 전류 션트 미터
- 주파수 카운터
- Nanovoltmeter
- Picoammeter
- 캘리브레이터
- Current Source
- 적외선 온도계
- 온습도계
- 조도계
- 소음계
- 회전계
- 냉매가스 측정기
- 방사선 측정기
- 파티클 카운터
- 진공계
- 풍량·풍속계
- 압력계
- 차압계
- 레코더
- 데이터로거
- PC 데이터로거
- 무선데이터 획득/분석시스템
- 오실로스코프
- PC탑재 오실로스코프
- PC기반 오실로스코프
- 아날로그 오실로스코프
- 휴대용 스코프미터
- 이동용 카트
- 프로브 & 악세사리
- 신호발생기
- 함수발생기
- 임의파형 함수발생기
- RF신호발생기
- 범용 DC 파워서플라이
- 프로그래머블DC전원공급기
- 일반DC전원공급기
- DC파워소스
- AC파워소스
- 전자부하
- LCR 미터
- 저저항계
- 고저항계
- 종합계측기(모듈타입)
- 스펙트럼 분석기
- RF신호발생기
- 네트워크 분석기
- 로직분석기
- 오디오분석기
- EMI
- EMC
- 정전기발생 시험장치
- 가우스 메타
- Flux 메타
[신재생]
- 태양전지/연료전지 평가시스템
- 프로그래머블 직류전원장치
- 배터리 테스터/시험장치
- 일사량/투과율 측정기
[자동차용]
- 전자로더
- Bipolar prog P/S
- 자동차용 측정기
- 자동차 고장진단 키트
[비파괴측정]
- 확대경
- 진동시험기
- 항온/항습기
- 거리측정기
- 레이저 레벨
- 검전기
- 형광등 테스터
- 후레쉬
- 리드/전류/고압 프루브
- 리드/프루브/클립
- 계측기용 전류 클램프
- 온도계 악세사리
- 케이스/홀스터
- 소프트웨어/케이블
- 배터리/충전지/어댑터
- 광측정기,클리너,탭
- 이동용 카트
 
클릭☞문의메일 보내기
 
 
Home > 제품소개  
아래 각 메뉴를 클릭하시면 신청메뉴나 해당 사이트를 바로 보실수 있습니다 클릭해서 새창이 뜨면 데모신청 정보 입력해주세요 클릭해서 새창이 뜨면 원하는 내용을 입력해주세요

: 전체 : LCR 미터 : 저저항계 : 고저항계
name
고정밀 LCR 미터...☞상세보기 hit: 2092
 모델명 : LCR-6000 시리즈
 브랜드 : GWINSTEK

 

주요사양 및 장점

• 모델명 : LCR-6300, LCR-6200, LCR-6100, LCR-6020, LCR-6002
• 테스트 주파수 : 10Hz~2kHz/20kHz/100kHz/200kHz/300kHz
• 기본 정확도 : 0.05%

특 징

- 10Hz~2kHz/20kHz/100kHz/200kHz/300kHz
- 0.05% 기본 정확도
- 연속적인 테스트 주파수 설정
- 3.5인치 컬러 LCD
- 측정 속도 : 최대 25ms
- Full/Spot 주파수 OPEN/SHORT 캘리브레이션
- 16개 측정 조합 + 2개 파라미터 모니터링
- DCR 측정 및 내부 DC 바이어스(±2.5V)
- PASS/FAIL 판정 기능
- ALC(Auto Level Control) 기능
- BIN 기능 : 9BIN + 1AUX
- 10개 스텝 테스트 기능(주파수/전압/전류)
- RS-232C, Handler, USB(Host) 인터페이스
- 2U, 1/2 랙 사이즈 설계


상세설명

GW Instek introduces the brand new high precision LCR meter─LCR-6000 series, which, with five models, has a test frequency range extending from 2kHz/20kHz/100kHz/200kHz/300kHz (maximum) and with 0.05% basic accuracy. The compact size design, 2U height and 1/2 rack, is one of the practical features of the series which is the optimum space saver suitable for either bench top or system rack. The compacted LCR-6000 series with abundant features is absolutely the excellent tool for R&D, production test, IQC, etc. on implementing each test stages for passive components.

The LCR-6000 series provides rich functionalities with the compact size. First of all, the entire series adopts 3.5-inch color LCD and features opulent display parameters. In addition to simultaneously displaying setting criteria and measurement results, the series increases two additional monitoring parameters. In other words, there are four parameters, primary/secondary and two monitoring, simultaneously shown on the screen that tremendously enhances the measurement efficiency. The enlarge display mode not only emphasizes the measurement results, but also provides PASS/FAIL judgment to facilitate a rapid and convenient test result.

Convenience is one of the unique features. The LCR-6000 series comes equipped with two zero methods, which are full frequency range and spot. Users, without turning off the power and changing test fixture, can freely change frequency within the provided frequency range to conduct measurements. By so doing, tremendous time can be saved from repeatedly executing zero operation. Additionally, frequency range of the series is consecutive that allows users to input precise frequency value to conduct the most genuine test on components.

The LCR-6000 series also features diverse ancillary measurements to meet the measurement requirements of different materials. For instance, the series provides the automatic level control (ALC) function to satisfy the test voltage requirement of MLCC. For inductive component measurements, the series provides the adjustable test current function and the D.C. resistance measurement function. The optional external bias current adapter (±2.5A) is to satisfy the measurement requirements. With respect to the D.C. bias voltage test for capacitive components requirements, the series allows users to conduct verification measurement on materials by its internal ±2.5V adjustable voltage or via an optional external bias voltage adapter (±45V). Furthermore, 10 steps of listed test functionalities allow users to set testing parameters (either by frequency, or voltage, or current) for each step based on users’ requirements in order to observe the trend of DUT characteristics.

The LCR-6000 series has 10 memory sets defined by panel setting criteria to facilitate users in selecting test criteria and saving time in repeated settings. 10,000 measurement result storage capability can easily record measurement results instantaneously. The USB host allows easy access to recorded results without connecting the series to the PC. The USB host also allows USB to retrieve and save screen so as to assist users in compiling setting guidelines.

For the external control, the LCR-6000 series provides handler interface and collocates with its measurement sorting function (9BIN, AUX: 1BIN) to facilitate the connection with sorting machine so as to sort out the materials. For remote control and measurement result retrieval requirements, the LCR-6000 series provides RS-232Cto assist setting control or measurement result retrieval via the PC commands. Additionally, the free PC software gives users an instant tool to store measurement results that saves time in developing programs.

The brand new compacted LCR-6000 series can effectively improve the limitation of space. Diverse measurement functionalities and display methods are making the series the high CP ratio choice in meeting the requirements of R&D, component assessment for engineering departments, category sorting requirements for component production, and IQC for verification on component specifications.


Consecutive frequency and Convenient zero function

The LCR-6000 series, within the provided frequency range, features consecutive and adjustable frequency capability which allows users to conduct measurement and analysis on components with the most genuine frequency requirements. For OPEN/SHORT fixture compensation function, the LCR-6000 series is equipped with full frequency range zero and spot zero selections. After executing full frequency range zero, users, under the conditions of not turning off the power and not changing test fixture, can freely change test frequency for the LCR-6000 series to execute component measurements that tremendously saves time in repeatedly zeroing test fixture after changing frequency.

01
 Consecutive and adjustable frequency
 Freely input frequency within provided frequency range

02
Selectable fixture zeroing methods
 Full frequency range zero or spot zero


Rich and diverse information display

The measurement result display of the LCR-6000 series not only reveals primary and secondary measurement parameters but also includes two monitoring parameters. Therefore, four DUT related parameters can be simultaneously shown on the display screen to save time if repeated measurements are required. With respect to display screen, the LCR-6000 series features diverse display to meet users’ observation requirements. For instance, MEAS display shows setting parameters and measurement results at the same time; ENLARGE display focuses on measurement results and PASS/FAIL judgment is available, which is conducive to assist engineers to swiftly obtain the validity of measurement results.

01
 MEAS display
Parameter setting and four measurement parameters 

02
ENLARGE display
Enlarge measurement results and include PASS/FAIL judgment


10 points listed tests and PC software

The LCR-6000 series provides the 10 points listed test function, which allows users to define a set of DUT measurement parameters (such as Cs- Rs) and to set 10 test criteria of category (either by frequency or by voltage or by current) but different values to conduct measurements. Through this function, users can rapidly and clearly obtain DUT’s characteristic variation trend to determine the adaptability of DUT’s practical applications. The measurement results can be recorded directly in the internal memory and be transferred to the PC through USB. The LCR-6000 series also provides free PC software (maximum 1,000 points listed tests) in order to satisfy users’ analytical requirements on delicate variation.

01
 Listed tests
Variation criteria based upon frequency or voltage/current

02
On software ─ characteristic curve
Provide more delicate characteristic variation trend


Diverse ancillary measurement functions

To satisfy the diverse measurement application requirements for different components and materials, the LCR-6000 series collocates with many auxiliary measurement functions. For capacitor measurement, Automatic Level Control (ALC) is mainly for component which requires a constant or rated test voltage such as multi-layer ceramic capacitor (MLCC). An internal D.C. bias voltage (±2.5V, internal) is allowing simulating A.C. and D.C. coexistence to learn capacitance variation. For inductor measurement, the D.C. resistance measurement function is to validate D.C. resistance characteristics. Additional, the LCZ function is to quickly identify components ’characteristics. When the function is activated, the LCR-6000 series will automatically determine DUTs’ characteristics and reveal the optimum parameters to show the measurement results.

01
Automatic level control
Ideal for measuring components with voltage requirements

02
Internal bias (±2.5V adjustable)
Ideal for capacitive components’ characteristic tests  

01
 D.C. resistance measurement
Ideal for inductive components’ D.C. characteristics verification


 

Standard Interface

For interface connectivity, the LCR-6000 series comes equipped with handler interface and RS-232C interface. Handler outputs 10 BIN (9BIN, AUX: 1BIN) sorting results that is best for external connection control, for instance, connecting to a sorting machine to conduct components’ sorting operation. RS-232C is suitable for remote control and measurement results retrieval. The PC gives commands to control settings or to read measurement results so as to achieve the requirements of verifying automotive applications.

02

 



상세사양



악세사리

- Safety Sheet x 1
- Power Cord x 1
- LCR-06A x 1
- CD x 1(User manual / PC software)

 

옵션 악세사리

- LCR-05, Test Fixture for Axial & Radial Lead Components
- LCR-06A, Kelvin Clip Test Lead
- LCR-07, Test Fixture, Two-Wire with Alligator Clips
- LCR-08, Test Fixture (Tweezers) for SMD/Chip Components
- LCR-15, Test Fixture for SMD/Chip Components (0201 to 1812)
- LCR-16, Test Fixture – ±45V DC Bias Voltage Box
- LCR-17, Test Fixture – ±2.5ADC Bias Current Box
- GTL-232, RS-232C Cable, 9-pin Female to 9-pin, null Modem for Computer, Approx.2m

 

주문정보

LCR-6300 : 300kHz 고정밀 LCR 미터
LCR-6200 : 200kHz 고정밀 LCR 미터
LCR-6100 : 100kHz 고정밀 LCR 미터
LCR-6020 : 20kHz 고정밀 LCR 미터
LCR-6002 : 2kHz 고정밀 LCR 미터



List     

상세보기..클릭하세요
클릭☞플루크 전제품보기
클릭☞굿윌 전제품보기
클릭☞ODA 전제품보기
클릭☞AMPROBE 전제품보기
클릭☞텍트로닉스 전제품보기
클릭☞오디오 전제품보기
클릭☞하맥 전제품보기
클릭☞노이즈캔 전제품보기
클릭☞쏘렌슨 전제품보기
클릭☞안리쯔 전제품보기
클릭☞메텍스 전제품보기
클릭☞크로마 전제품보기
클릭☞영일 전제품보기
클릭☞셈웨어 전제품보기
상세보기..클릭하세요
대구광역시 북구 유통단지로 38 전기재료관 마동 104호 (산격동) | 전국대표번호 : 1661-3799
Copyright ⓒ topsi.co.kr All rights reserved.