ANALOG INPUT |
Number of channels |
8 (simultaneously sampled) |
Measured values |
Voltage, full bridge (IEPE, charge, thermocouple and RTD with MSI adapters) |
Resolution |
24-bit |
Type of ADC |
Sigma-Delta |
Sampling rate |
204.8 kS/s |
-3 dB bandwith |
76 kHz @ 200 kS/s |
AMPLIFIER CHARACTERISTICS |
Input ranges |
Voltage |
±0.01 V, ±0.1 V, ±1 V, ±10 V |
Voltage via MSI-BR-V200 |
up to ±200 V |
Full bridge |
±10 mV/V, ±100 mV/V, ±1000 mV/V |
Half or quarter bridge |
With external bridge completion |
IEPE via MSI-BR-ACC |
±0.1 V, ±1 V, ±10 V |
Thermocouple via MSI-BR-THx |
Full range of thermocouple type (isolated thermocouple only) |
Pt100, Pt200, Pt500, Pt1000, Pt2000 and resistance via MSI-BR-RTD |
-200°C to 1000°Cand 0 to 6.5 kOhm |
DC accuracy |
10 V range: 0.1 % of value, +1 mV1 V range: 0.1 % of value, +0.5 mV100 mV range: 0.1 % of value, +0.1 mV10 mV range: 0.1 % of value, +0.1 mV |
Input impedance |
10 MΩ||33 pF (common mode), 20 MΩ||47 pF (differential mode) |
CMRR |
>80 dB |
Sensor supply voltage |
±5 V 0.1 % @ 100 mA, 12 V @ 400 mA per channel |
Voltage mode coupling |
DC |
Input overvoltage protection |
±70 V |
DYNAMIC CHARACTERISTICS |
Signal to noise @ fs<1000 Hz |
< -100 dB |
Crosstalk |
< -100 dB |
COUNTER/DIGITAL INPUTS |
Number of channels |
8 counters or 24 digital inputs(per software each counter can be selected to be 3x digital input) |
Counter modes |
Event counting, encoder input, period, pulsewidth, duty cycle, frequency measurement |
Resolution |
32-bit |
Time base |
50 MHz |
Signal levels |
TTL/CMOS |
Input voltage protection |
30 V |
CAN INPUTS |
Number of channels |
2 |
Specification |
CAN 2.0B |
Physical layer |
High speed |
ENVIRONMENTAL |
Operating temperature |
0 to 50°C |
Storage temperature |
-20 to 70°C |
Relative humidity |
10 to 90 % |
Vibration |
MIL-STD 810F 514.5, procedure I |
Shock |
MIL-STD 810F 516.5, procedure I |
PHYSICAL |
Dimensions (L x W x H) |
223 x 78 x 45 mm (7.78 x 3.08 x 1.77 inch) |
Weight |
0.72 kg (1.58 pounds) |
POWER REQUIREMENTS |
Supply voltage |
6 to 36 VDC |
Supply overvoltage protection |
80 V |
Negative input voltage protection |
-30 V |
Typical power consumption |
5 W |
Maximum sensor consumption |
6 W |
SYSTEM REQUIREMENTS |
Operating system |
Microsoft Widnows XP®Microsoft Windows Vista®Microsoft Windows 7® |
System |
PC with DEWESoft software |
Interface |
USB 2.0 |
IN THE PACKAGE |
DEWE 43 |
DEWESoft 7 - Standard Edition (DSA upgrade available) |
MINI USB cable (equipped with special lock-in screws for secure connection) |
Carrying bag |
Power supply with cable (comes with 4 different power plugs for world wide usage) |
Device ground cable |
))
